▲ 主編的行業標準 (Mainly Participate in the Editing of Industry Standards)
◆ 中國工程建設標準協會標準《鋼水罐砌筑工程施工及驗收規程》CECS251:2009
“Ladle Refractory Construction and Acceptance Procedure” CECS251:2009, Standards of China Engineering Construction Standards Association
◆ 中國工程建設標準協會標準《煉鋼連鑄中間包砌筑施工及驗收規程》CECS310:2012
“Construction and Acceptance Procedure of Continuous-casting tundish” CECS310:2012, Standards of China Engineering Construction Standards Association
◆ 中國工程建設標準協會標準《鋼液真空循環脫氣法(RH)真空爐砌筑工程施工及驗收規程》CECS450:2016
“ Construction and Acceptance Procedure of RH Vacuum furnace” CECS450:2016, Standards of China Engineering Construction Standards Association
▲ 參加編寫的國家行業標準 (Participate in the Editing of National Industry Standards)
◆ 《工業爐砌筑工程質量驗收規范》GB50309-2017
“Quality Inspection and Assessment Standard for Industry Furnace Construction” GB50309-2017
◆ 《工業爐砌筑工程施工與驗收規范》GB50211-2014
“Industry Furnace Construction and Acceptance Procedure” GB50211-2014
◆ 《殘碳量小于7%的堿性致密定形耐火制品分類》GB/T18931-2008
“Classification of Basic Dense Shaped Refractory Products with residual carbon content less than 7%”, GB/T18931-2008
◆ 《鋁硅系致密定形耐火制品分類》GB/T17105-2008
“Classification of Al-Si Dense Shaped Refractory Products”, GB/T17105-2008
◆ 《高爐及熱風爐用耐火磚形狀尺寸》
“Shape & Size of Refractory Brick for Blast Furnace and Hot Stove”
◆ 《鋼包用耐火磚形狀尺寸》
“Shape & Size of Refractory Brick for ladle”
▲ 參加編寫的行業施工指導手冊 (Participate in the Editing of Construction Instruction)
◆ 《筑爐工手冊》
“Operate Instruction for Furnace Construction”
▲ 武漢市科技成果 (Science and Technology Achievements of Wuhan)
◆ 提高武鋼二煉鋼廠90噸真空爐壽命攻關
“Technical Innovation for increasing life of 90T RH Refining Furnace in No.2 Steelmaking Mill, WISCO”
◆ 武鋼煉鋼總廠二分廠80t鋼包長壽研究
“Long-life Research for 80t Ladle of No.2 Steelmaking Mill, WISCO”
◆ 500萬t/a球團焙燒系統環冷機耐材長壽技術的研究與應用
Research and Application about the Refractory’s Long Life of Sintering Circular Cooler in 5 million t/a Pellet Baking System
◆ 武鋼煉鋼總廠三分廠250/300t鋼水罐長壽技術研究與應用
Research and Application about the Long Life of 250/300t Steel Ladle in No.3 Steelmaking Mill, WISCO
◆ 200噸RH精煉爐長壽技術研究
Research about Long Life of 200MT RH Refining Furnace
◆ 連鑄用重型翻包機技術改造與應用
Technical Improvement and Application for Overturn Device of Heavy Ladle in Continuous Casting Production
◆ 40噸五流T型連鑄中間包長壽技術研究
Technical Research about the Long Life of 40MT 5-Strand Type-T Tundish of Continuous Casting Machine
◆ 大型煉鋼轉爐爐襯結構優化及施工技術的研究與應用
Research and Application about the Optimization and Construction Technology of Converter Lining
◆ 提高大型鋼水罐使用性能的研究與應用
Research and Application about the Performance Improvement of the Large Steel Ladle
◆ 一種多點布控鎖磚的轉爐爐底結構及其砌筑方法
Complex Structure and Construction Method of Converter Bottom Lining
◆ 一種煉鋼廠鋼水連續澆鑄用中間包的施工方法
Construction Method of Continuous Casting Tundish in the Steelmaking Mill